IRac Class Reference

A universal/common/generic interface for controling supported A/Cs. More...

#include <IRac.h>

Collaboration diagram for IRac:

Public Member Functions
	IRac (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...
void	markAsSent (void)
	Update the previous state to the current one. More...
bool	sendAc (void)
	Send an A/C message based soley on our internal state. More...
bool	sendAc (const stdAc::state_t desired, const stdAc::state_t *prev=NULL)
	Send A/C message for a given device using state_t structures. More...
bool	sendAc (const decode_type_t vendor, const int16_t model, const bool power, const stdAc::opmode_t mode, const float degrees, const bool celsius, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool light, const bool filter, const bool clean, const bool beep, const int16_t sleep=-1, const int16_t clock=-1)
	Send A/C message for a given device using common A/C settings. More...
stdAc::state_t	getState (void)
	Get the current internal A/C climate state. More...
stdAc::state_t	getStatePrev (void)
	Get the previous internal A/C climate state that should have already been sent to the device. i.e. What the A/C unit should already be set to. More...
bool	hasStateChanged (void)
	Check if the internal state has changed from what was previously sent. More...

Static Public Member Functions
static bool	isProtocolSupported (const decode_type_t protocol)
	Is the given protocol supported by the IRac class? More...
static void	initState (stdAc::state_t *state, const decode_type_t vendor, const int16_t model, const bool power, const stdAc::opmode_t mode, const float degrees, const bool celsius, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool light, const bool filter, const bool clean, const bool beep, const int16_t sleep, const int16_t clock)
	Initialise the given state with the supplied settings. More...
static void	initState (stdAc::state_t *state)
	Initialise the given state with the supplied settings. More...
static bool	cmpStates (const stdAc::state_t a, const stdAc::state_t b)
	Compare two AirCon states. More...
static bool	strToBool (const char *str, const bool def=false)
	Convert the supplied str into the appropriate boolean value. More...
static int16_t	strToModel (const char *str, const int16_t def=-1)
	Convert the supplied str into the appropriate enum. More...
static stdAc::ac_command_t	strToCommandType (const char *str, const stdAc::ac_command_t def=stdAc::ac_command_t::kControlCommand)
	Convert the supplied str into the appropriate enum. More...
static stdAc::opmode_t	strToOpmode (const char *str, const stdAc::opmode_t def=stdAc::opmode_t::kAuto)
	Convert the supplied str into the appropriate enum. More...
static stdAc::fanspeed_t	strToFanspeed (const char *str, const stdAc::fanspeed_t def=stdAc::fanspeed_t::kAuto)
	Convert the supplied str into the appropriate enum. More...
static stdAc::swingv_t	strToSwingV (const char *str, const stdAc::swingv_t def=stdAc::swingv_t::kOff)
	Convert the supplied str into the appropriate enum. More...
static stdAc::swingh_t	strToSwingH (const char *str, const stdAc::swingh_t def=stdAc::swingh_t::kOff)
	Convert the supplied str into the appropriate enum. More...
static String	boolToString (const bool value)
	Convert the supplied boolean into the appropriate String. More...
static String	commandTypeToString (const stdAc::ac_command_t cmdType)
	Convert the supplied operation mode into the appropriate String. More...
static String	opmodeToString (const stdAc::opmode_t mode, const bool ha=false)
	Convert the supplied operation mode into the appropriate String. More...
static String	fanspeedToString (const stdAc::fanspeed_t speed)
	Convert the supplied fan speed enum into the appropriate String. More...
static String	swingvToString (const stdAc::swingv_t swingv)
	Convert the supplied enum into the appropriate String. More...
static String	swinghToString (const stdAc::swingh_t swingh)
	Convert the supplied enum into the appropriate String. More...

Public Attributes
stdAc::state_t	next
	The state we want the device to be in after we send. More...

Private Member Functions
void	airton (IRAirtonAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool light, const bool econo, const bool filter, const int16_t sleep=-1)
	Send an Airton 56-bit A/C message with the supplied settings. More...
void	airwell (IRAirwellAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan)
	Send an Airwell A/C message with the supplied settings. More...
void	amcor (IRAmcorAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan)
	Send an Amcor A/C message with the supplied settings. More...
void	argo (IRArgoAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const float sensorTemp, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool iFeel, const bool turbo, const int16_t sleep=-1)
	Send an Argo A/C message with the supplied settings. More...
void	argoWrem3_ACCommand (IRArgoAC_WREM3 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const float sensorTemp, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool iFeel, const bool night, const bool econo, const bool turbo, const bool filter, const bool light)
	Send an Argo A/C WREM-3 AC control message with the supplied settings. More...
void	argoWrem3_iFeelReport (IRArgoAC_WREM3 *ac, const float sensorTemp)
	Send an Argo A/C WREM-3 iFeel (room temp) silent (no beep) report. More...
void	argoWrem3_ConfigSet (IRArgoAC_WREM3 *ac, const uint8_t param, const uint8_t value, bool safe=true)
	Send an Argo A/C WREM-3 Config command. More...
void	argoWrem3_SetTimer (IRArgoAC_WREM3 *ac, bool on, const uint16_t currentTime, const uint16_t delayMinutes)
	Send an Argo A/C WREM-3 Delay timer command. More...
void	bosch144 (IRBosch144AC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const bool quiet)
	Send a Bosch144 A/C message with the supplied settings. More...
void	carrier64 (IRCarrierAc64 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const int16_t sleep=-1)
	Send a Carrier 64-bit A/C message with the supplied settings. More...
void	coolix (IRCoolixAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const float sensorTemp, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool iFeel, const bool turbo, const bool light, const bool clean, const int16_t sleep=-1)
	Send a Coolix A/C message with the supplied settings. More...
void	corona (IRCoronaAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool econo)
	Send a Corona A/C message with the supplied settings. More...
void	daikin (IRDaikinESP *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool clean)
	Send a Daikin A/C message with the supplied settings. More...
void	daikin128 (IRDaikin128 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet, const bool turbo, const bool light, const bool econo, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Daikin 128-bit A/C message with the supplied settings. More...
void	daikin152 (IRDaikin152 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet, const bool turbo, const bool econo)
	Send a Daikin 152-bit A/C message with the supplied settings. More...
void	daikin160 (IRDaikin160 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv)
	Send a Daikin 160-bit A/C message with the supplied settings. More...
void	daikin176 (IRDaikin176 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingh_t swingh)
	Send a Daikin 176-bit A/C message with the supplied settings. More...
void	daikin2 (IRDaikin2 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool light, const bool econo, const bool filter, const bool clean, const bool beep, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Daikin2 A/C message with the supplied settings. More...
void	daikin216 (IRDaikin216 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo)
	Send a Daikin 216-bit A/C message with the supplied settings. More...
void	daikin64 (IRDaikin64 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet, const bool turbo, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Daikin 64-bit A/C message with the supplied settings. More...
void	delonghiac (IRDelonghiAc *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const bool turbo, const int16_t sleep=-1)
	Send a Delonghi A/C message with the supplied settings. More...
void	ecoclim (IREcoclimAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const float sensorTemp, const stdAc::fanspeed_t fan, const int16_t sleep=-1, const int16_t clock=-1)
	Send an EcoClim A/C message with the supplied settings. More...
void	electra (IRElectraAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const float sensorTemp, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool iFeel, const bool turbo, const bool lighttoggle, const bool clean)
	Send an Electra A/C message with the supplied settings. More...
void	fujitsu (IRFujitsuAC *ac, const fujitsu_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool filter, const bool clean, const int16_t sleep=-1)
	Send a Fujitsu A/C message with the supplied settings. More...
void	goodweather (IRGoodweatherAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool light, const int16_t sleep=-1)
	Send a Goodweather A/C message with the supplied settings. More...
void	gree (IRGreeAC *ac, const gree_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool iFeel, const bool turbo, const bool econo, const bool light, const bool clean, const int16_t sleep=-1)
	Send a Gree A/C message with the supplied settings. More...
void	haier (IRHaierAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool filter, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Haier A/C message with the supplied settings. More...
void	haier160 (IRHaierAC160 *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool quiet, const bool filter, const bool clean, const bool light, const bool prevlight, const int16_t sleep=-1)
	Send a Haier 160 bit A/C message with the supplied settings. More...
void	haier176 (IRHaierAC176 *ac, const haier_ac176_remote_model_t model, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool quiet, const bool filter, const int16_t sleep=-1)
	Send a Haier 176 bit A/C message with the supplied settings. More...
void	haierYrwo2 (IRHaierACYRW02 *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool quiet, const bool filter, const int16_t sleep=-1)
	Send a Haier YRWO2 A/C message with the supplied settings. More...
void	hitachi (IRHitachiAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh)
	Send a Hitachi A/C message with the supplied settings. More...
void	hitachi1 (IRHitachiAc1 *ac, const hitachi_ac1_remote_model_t model, const bool on, const bool power_toggle, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool swing_toggle, const int16_t sleep=-1)
	Send a Hitachi1 A/C message with the supplied settings. More...
void	hitachi264 (IRHitachiAc264 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan)
	Send a Hitachi 264-bit A/C message with the supplied settings. More...
void	hitachi296 (IRHitachiAc296 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan)
	Send a Hitachi 296-bit A/C message with the supplied settings. More...
void	hitachi344 (IRHitachiAc344 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh)
	Send a Hitachi 344-bit A/C message with the supplied settings. More...
void	hitachi424 (IRHitachiAc424 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv)
	Send a Hitachi 424-bit A/C message with the supplied settings. More...
void	kelon (IRKelonAc *ac, const bool togglePower, const stdAc::opmode_t mode, const int8_t dryGrade, const float degrees, const stdAc::fanspeed_t fan, const bool toggleSwing, const bool superCool, const int16_t sleep)
	Send a Kelon A/C message with the supplied settings. More...
void	kelvinator (IRKelvinatorAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool light, const bool filter, const bool clean)
	Send a Kelvinator A/C message with the supplied settings. More...
void	lg (IRLgAc *ac, const lg_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingv_t swingv_prev, const stdAc::swingh_t swingh, const bool light)
	Send a LG A/C message with the supplied settings. More...
void	midea (IRMideaAC *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const float sensorTemp, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool iFeel, const bool quiet, const bool quiet_prev, const bool turbo, const bool econo, const bool light, const bool clean, const int16_t sleep=-1)
	Send a Midea A/C message with the supplied settings. More...
void	mirage (IRMirageAc *ac, const stdAc::state_t state)
	Send a Mirage 120-bit A/C message with the supplied settings. More...
void	mitsubishi (IRMitsubishiAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const int16_t clock=-1)
	Send a Mitsubishi A/C message with the supplied settings. More...
void	mitsubishi112 (IRMitsubishi112 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet)
	Send a Mitsubishi 112-bit A/C message with the supplied settings. More...
void	mitsubishi136 (IRMitsubishi136 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet)
	Send a Mitsubishi 136-bit A/C message with the supplied settings. More...
void	mitsubishiHeavy88 (IRMitsubishiHeavy88Ac *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool econo, const bool clean)
	Send a Mitsubishi Heavy 88-bit A/C message with the supplied settings. More...
void	mitsubishiHeavy152 (IRMitsubishiHeavy152Ac *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool filter, const bool clean, const int16_t sleep=-1)
	Send a Mitsubishi Heavy 152-bit A/C message with the supplied settings. More...
void	neoclima (IRNeoclimaAc *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool econo, const bool light, const bool filter, const int16_t sleep=-1)
	Send a Neoclima A/C message with the supplied settings. More...
void	panasonic (IRPanasonicAc *ac, const panasonic_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool filter, const int16_t clock=-1)
	Send a Panasonic A/C message with the supplied settings. More...
void	panasonic32 (IRPanasonicAc32 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh)
	Send a Panasonic A/C message with the supplied settings. More...
void	rhoss (IRRhossAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swing)
	Send an Rhoss A/C message with the supplied settings. More...
void	samsung (IRSamsungAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool light, const bool filter, const bool clean, const bool beep, const int16_t sleep=-1, const bool prevpower=true, const int16_t prevsleep=-1, const bool forceextended=true)
	Send a Samsung A/C message with the supplied settings. More...
void	sanyo (IRSanyoAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const float sensorTemp, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool iFeel, const bool beep, const int16_t sleep=-1)
	Send a Sanyo A/C message with the supplied settings. More...
void	sanyo88 (IRSanyoAc88 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool filter, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Sanyo 88-bit A/C message with the supplied settings. More...
void	sharp (IRSharpAc *ac, const sharp_ac_remote_model_t model, const bool on, const bool prev_power, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingv_t swingv_prev, const bool turbo, const bool light, const bool filter, const bool clean)
	Send a Sharp A/C message with the supplied settings. More...
void	tcl112 (IRTcl112Ac *ac, const tcl_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool light, const bool econo, const bool filter)
	Send a TCL 112-bit A/C message with the supplied settings. More...
void	technibel (IRTechnibelAc *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const int16_t sleep=-1)
	Send a Technibel A/C message with the supplied settings. More...
void	teco (IRTecoAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool light, const int16_t sleep=-1)
	Send a Teco A/C message with the supplied settings. More...
void	toshiba (IRToshibaAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool econo, const bool filter)
	Send a Toshiba A/C message with the supplied settings. More...
void	trotec (IRTrotecESP *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const int16_t sleep=-1)
	Send a Trotec A/C message with the supplied settings. More...
void	trotec3550 (IRTrotec3550 *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv)
	Send a Trotec 3550 A/C message with the supplied settings. More...
void	truma (IRTrumaAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const bool quiet)
	Send a Truma A/C message with the supplied settings. More...
void	vestel (IRVestelAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool filter, const int16_t sleep=-1, const int16_t clock=-1, const bool sendNormal=true)
	Send a Vestel A/C message with the supplied settings. More...
void	voltas (IRVoltas *ac, const voltas_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool econo, const bool light, const int16_t sleep=-1)
	Send a Voltas A/C message with the supplied settings. More...
void	whirlpool (IRWhirlpoolAc *ac, const whirlpool_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool light, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Whirlpool A/C message with the supplied settings. More...
void	transcold (IRTranscoldAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh)
	Send a Transcold A/C message with the supplied settings. More...

Static Private Member Functions
static stdAc::state_t	cleanState (const stdAc::state_t state)
	Create a new state base on the provided state that has been suitably fixed. More...
static stdAc::state_t	handleToggles (const stdAc::state_t desired, const stdAc::state_t *prev=NULL)
	Create a new state base on desired & previous states but handle any state changes for options that need to be toggled. More...

Private Attributes
uint16_t	_pin
	The GPIO to use to transmit messages from. More...
bool	_inverted
	IR LED is lit when GPIO is LOW (true) or HIGH (false)? More...
bool	_modulation
	Is frequency modulation to be used? More...
stdAc::state_t	_prev
	The state we expect the device to currently be in. More...

Detailed Description

A universal/common/generic interface for controling supported A/Cs.

Constructor & Destructor Documentation

IRac()

IRac::IRac ( const uint16_t  pin, const bool  inverted = false, const bool  use_modulation = true  )

explicit

Class constructor.

Parameters

[in]	pin	Gpio pin to use when transmitting IR messages.
[in]	inverted	true, gpio output defaults to high. false, to low.
[in]	use_modulation	true means use frequency modulation. false, don't.

Member Function Documentation

airton()

void IRac::airton ( IRAirtonAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  turbo, const bool  light, const bool  econo, const bool  filter, const int16_t  sleep = -1  )

private

Send an Airton 56-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRAirtonAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/health/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode.

Note

-1 is Off, >= 0 is on.

airwell()

void IRac::airwell ( IRAirwellAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan  )

private

Send an Airwell A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRAirwellAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.

amcor()

void IRac::amcor ( IRAmcorAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan  )

private

Send an Amcor A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRAmcorAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.

argo()

void IRac::argo ( IRArgoAC *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const float  sensorTemp, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  iFeel, const bool  turbo, const int16_t  sleep = -1  )

private

Send an Argo A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRArgoAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	sensorTemp	The room (iFeel) temperature sensor reading in degrees Celsius.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	iFeel	Whether to enable iFeel (remote temp) mode on the A/C unit.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	sleep	Nr. of minutes for sleep mode.

Note

-1 is Off, >= 0 is on.

argoWrem3_ACCommand()

void IRac::argoWrem3_ACCommand ( IRArgoAC_WREM3 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const float  sensorTemp, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  iFeel, const bool  night, const bool  econo, const bool  turbo, const bool  filter, const bool  light  )

private

Send an Argo A/C WREM-3 AC control message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRArgoAC_WREM3 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The set temperature setting in degrees Celsius.
[in]	sensorTemp	The room (iFeel) temperature sensor reading in degrees Celsius.

Warning

The sensorTemp param is assumed to be in 0..255 range (uint8_t) The overflow is not checked, though.

Note

The value is rounded to nearest integer, rounding halfway cases away from zero. E.g. 1.5 [C] becomes 2 [C].

Parameters

[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	iFeel	Whether to enable iFeel (remote temp) mode on the A/C unit.
[in]	night	Enable night mode (raises temp by +1*C after 1h).
[in]	econo	Enable eco mode (limits power consumed).
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Enable filter mode
[in]	light	Enable device display/LEDs

argoWrem3_ConfigSet()

void IRac::argoWrem3_ConfigSet ( IRArgoAC_WREM3 *  ac, const uint8_t  param, const uint8_t  value, bool  safe = true  )

private

Send an Argo A/C WREM-3 Config command.

Parameters

[in,out]	ac	A Ptr to an IRArgoAC_WREM3 object to use.
[in]	param	The parameter ID.
[in]	value	The parameter value.
[in]	safe	If true, will only allow setting the below parameters in order to avoid accidentally setting a restricted vendor-specific param and breaking the A/C device

Note

Known parameters (P<xx>, where xx is the param) P05 - Temperature Scale (0-Celsius, 1-Fahrenheit) P06 - Transmission channel (0..3) P12 - ECO mode power input limit (30..99, default: 75)

argoWrem3_iFeelReport()

void IRac::argoWrem3_iFeelReport ( IRArgoAC_WREM3 *  ac, const float  sensorTemp  )

private

Send an Argo A/C WREM-3 iFeel (room temp) silent (no beep) report.

Parameters

[in,out]	ac	A Ptr to an IRArgoAC_WREM3 object to use.
[in]	sensorTemp	The room (iFeel) temperature setting in degrees Celsius.

Warning

The sensorTemp param is assumed to be in 0..255 range (uint8_t) The overflow is not checked, though.

Note

The value is rounded to nearest integer, rounding halfway cases away from zero. E.g. 1.5 [C] becomes 2 [C].

argoWrem3_SetTimer()

void IRac::argoWrem3_SetTimer ( IRArgoAC_WREM3 *  ac, bool  on, const uint16_t  currentTime, const uint16_t  delayMinutes  )

private

Send an Argo A/C WREM-3 Delay timer command.

Parameters

[in,out]	ac	A Ptr to an IRArgoAC_WREM3 object to use.
[in]	on	Whether the unit is currently on. The timer, upon elapse will toggle this state
[in]	currentTime	currentTime in minutes, starting from 00:00

Note

For timer mode, this value is not really used much so can be zero.

Parameters

[in]

delayMinutes

Number of minutes after which the on state should be toggled

Note

Schedule timers are not exposed via this interface

boolToString()

String IRac::boolToString ( const bool  value )

static

Convert the supplied boolean into the appropriate String.

Parameters

[in]

value

The boolean value to be converted.

Returns

The equivalent String for the locale.

bosch144()

void IRac::bosch144 ( IRBosch144AC *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const bool  quiet  )

private

Send a Bosch144 A/C message with the supplied settings.

Note

May result in multiple messages being sent.

Parameters

[in,out]	ac	A Ptr to an IRBosch144AC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	quiet	Run the device in quiet/silent mode.

Note

-1 is Off, >= 0 is on.

carrier64()

void IRac::carrier64 ( IRCarrierAc64 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const int16_t  sleep = -1  )

private

Send a Carrier 64-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRCarrierAc64 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	sleep	Nr. of minutes for sleep mode.

Note

-1 is Off, >= 0 is on.

cleanState()

stdAc::state_t IRac::cleanState ( const stdAc::state_t  state )

staticprivate

Create a new state base on the provided state that has been suitably fixed.

Note

This is for use with Home Assistant, which requires mode to be off if the power is off.

Parameters

[in]

state

The state_t structure describing the desired a/c state.

Returns

A stdAc::state_t with the needed settings.

cmpStates()

bool IRac::cmpStates ( const stdAc::state_t  a, const stdAc::state_t  b  )

static

Compare two AirCon states.

Note

The comparison excludes the clock.

Parameters

a	A state_t to be compared.
b	A state_t to be compared.

Returns

True if they differ, False if they don't.

commandTypeToString()

String IRac::commandTypeToString ( const stdAc::ac_command_t  cmdType )

static

Convert the supplied operation mode into the appropriate String.

Parameters

[in]

cmdType

The enum to be converted.

Returns

The equivalent String for the locale.

coolix()

void IRac::coolix ( IRCoolixAC *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const float  sensorTemp, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  iFeel, const bool  turbo, const bool  light, const bool  clean, const int16_t  sleep = -1  )

private

Send a Coolix A/C message with the supplied settings.

Note

May result in multiple messages being sent.

Parameters

[in,out]	ac	A Ptr to an IRCoolixAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	sensorTemp	The room (iFeel) temperature sensor reading in degrees Celsius.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	iFeel	Whether to enable iFeel (remote temp) mode on the A/C unit.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode.

Note

-1 is Off, >= 0 is on.

corona()

void IRac::corona ( IRCoronaAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  econo  )

private

Send a Corona A/C message with the supplied settings.

Note

May result in multiple messages being sent.

Parameters

[in,out]	ac	A Ptr to an IRCoronaAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	econo	Run the device in economical mode.

daikin()

void IRac::daikin ( IRDaikinESP *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  econo, const bool  clean  )

private

Send a Daikin A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikinESP object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

daikin128()

void IRac::daikin128 ( IRDaikin128 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  quiet, const bool  turbo, const bool  light, const bool  econo, const int16_t  sleep = -1, const int16_t  clock = -1  )

private

Send a Daikin 128-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin128 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	econo	Run the device in economical mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

daikin152()

void IRac::daikin152 ( IRDaikin152 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  quiet, const bool  turbo, const bool  econo  )

private

Send a Daikin 152-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin152 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.

daikin160()

void IRac::daikin160 ( IRDaikin160 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv  )

private

Send a Daikin 160-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin160 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.

daikin176()

void IRac::daikin176 ( IRDaikin176 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingh_t  swingh  )

private

Send a Daikin 176-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin176 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingh	The horizontal swing setting.

daikin2()

void IRac::daikin2 ( IRDaikin2 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  light, const bool  econo, const bool  filter, const bool  clean, const bool  beep, const int16_t  sleep = -1, const int16_t  clock = -1  )

private

Send a Daikin2 A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin2 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

daikin216()

void IRac::daikin216 ( IRDaikin216 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo  )

private

Send a Daikin 216-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin216 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.

daikin64()

void IRac::daikin64 ( IRDaikin64 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  quiet, const bool  turbo, const int16_t  sleep = -1, const int16_t  clock = -1  )

private

Send a Daikin 64-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin64 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

delonghiac()

void IRac::delonghiac ( IRDelonghiAc *  ac, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const bool  turbo, const int16_t  sleep = -1  )

private

Send a Delonghi A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDelonghiAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

ecoclim()

void IRac::ecoclim ( IREcoclimAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const float  sensorTemp, const stdAc::fanspeed_t  fan, const int16_t  sleep = -1, const int16_t  clock = -1  )

private

Send an EcoClim A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IREcoclimAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	sensorTemp	The room (iFeel) temperature sensor reading in degrees Celsius.
[in]	fan	The speed setting for the fan.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

electra()

void IRac::electra ( IRElectraAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const float  sensorTemp, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  iFeel, const bool  turbo, const bool  lighttoggle, const bool  clean  )

private

Send an Electra A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRElectraAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	sensorTemp	The room (iFeel) temperature sensor reading in degrees Celsius.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	iFeel	Whether to enable iFeel (remote temp) mode on the A/C unit.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	lighttoggle	Should we toggle the LED/Display?
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

fanspeedToString()

String IRac::fanspeedToString ( const stdAc::fanspeed_t  speed )

static

Convert the supplied fan speed enum into the appropriate String.

Parameters

[in]

speed

The enum to be converted.

Returns

The equivalent String for the locale.

fujitsu()

void IRac::fujitsu ( IRFujitsuAC *  ac, const fujitsu_ac_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  econo, const bool  filter, const bool  clean, const int16_t  sleep = -1  )

private

Send a Fujitsu A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRFujitsuAC object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode. <= 0 is Off, > 0 is on.

getState()

stdAc::state_t IRac::getState

(

void

)

Get the current internal A/C climate state.

Returns

A Ptr to a state containing the current (to be sent) settings.

getStatePrev()

stdAc::state_t IRac::getStatePrev

(

void

)

Get the previous internal A/C climate state that should have already been sent to the device. i.e. What the A/C unit should already be set to.

Returns

A Ptr to a state containing the previously sent settings.

goodweather()

void IRac::goodweather ( IRGoodweatherAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  turbo, const bool  light, const int16_t  sleep = -1  )

private

Send a Goodweather A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRGoodweatherAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

gree()

void IRac::gree ( IRGreeAC *  ac, const gree_ac_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  iFeel, const bool  turbo, const bool  econo, const bool  light, const bool  clean, const int16_t  sleep = -1  )

private

Send a Gree A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRGreeAC object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	iFeel	Whether to enable iFeel (remote temp) mode on the A/C unit.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Toggle the device's economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

haier()

void IRac::haier ( IRHaierAC *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  filter, const int16_t  sleep = -1, const int16_t  clock = -1  )

private

Send a Haier A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRGreeAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

haier160()

void IRac::haier160 ( IRHaierAC160 *  ac, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  turbo, const bool  quiet, const bool  filter, const bool  clean, const bool  light, const bool  prevlight, const int16_t  sleep = -1  )

private

Send a Haier 160 bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHaierAC160 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	quiet	Run the device in quiet mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the clean mode.
[in]	light	Turn on the LED/Display mode.
[in]	prevlight	Previous LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

haier176()

void IRac::haier176 ( IRHaierAC176 *  ac, const haier_ac176_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  turbo, const bool  quiet, const bool  filter, const int16_t  sleep = -1  )

private

Send a Haier 176 bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHaierAC176 object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	quiet	Run the device in quiet mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

haierYrwo2()

void IRac::haierYrwo2 ( IRHaierACYRW02 *  ac, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  turbo, const bool  quiet, const bool  filter, const int16_t  sleep = -1  )

private

Send a Haier YRWO2 A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHaierACYRW02 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	quiet	Run the device in quiet mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

handleToggles()

stdAc::state_t IRac::handleToggles ( const stdAc::state_t  desired, const stdAc::state_t *  prev = NULL  )

staticprivate

Create a new state base on desired & previous states but handle any state changes for options that need to be toggled.

Parameters

[in]	desired	The state_t structure describing the desired a/c state.
[in]	prev	A Ptr to the previous state_t structure.

Returns

A stdAc::state_t with the needed settings.

hasStateChanged()

bool IRac::hasStateChanged

(

void

)

Check if the internal state has changed from what was previously sent.

Note

The comparison excludes the clock.

Returns

True if it has changed, False if not.

hitachi()

void IRac::hitachi ( IRHitachiAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh  )

private

Send a Hitachi A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.

hitachi1()

void IRac::hitachi1 ( IRHitachiAc1 *  ac, const hitachi_ac1_remote_model_t  model, const bool  on, const bool  power_toggle, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  swing_toggle, const int16_t  sleep = -1  )

private

Send a Hitachi1 A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc1 object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	power_toggle	The power toggle setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	swing_toggle	The swing_toggle setting.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

Note

The sleep mode used is the "Sleep 2" setting.

hitachi264()

void IRac::hitachi264 ( IRHitachiAc264 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan  )

private

Send a Hitachi 264-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc264 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.

hitachi296()

void IRac::hitachi296 ( IRHitachiAc296 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan  )

private

Send a Hitachi 296-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc296 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.

hitachi344()

void IRac::hitachi344 ( IRHitachiAc344 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh  )

private

Send a Hitachi 344-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc344 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.

hitachi424()

void IRac::hitachi424 ( IRHitachiAc424 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv  )

private

Send a Hitachi 424-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc424 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.

initState() [1/2]

void IRac::initState ( stdAc::state_t *  state )

static

Initialise the given state with the supplied settings.

Parameters

[out]

state

A Ptr to where the settings will be stored.

Note

Sets all the parameters to reasonable base/automatic defaults.

initState() [2/2]

void IRac::initState ( stdAc::state_t *  state, const decode_type_t  vendor, const int16_t  model, const bool  power, const stdAc::opmode_t  mode, const float  degrees, const bool  celsius, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  econo, const bool  light, const bool  filter, const bool  clean, const bool  beep, const int16_t  sleep, const int16_t  clock  )

static

Initialise the given state with the supplied settings.

Parameters

[out]	state	A Ptr to where the settings will be stored.
[in]	vendor	The vendor/protocol type.
[in]	model	The A/C model if applicable.
[in]	power	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on. Some devices it is the nr. of mins to run for. Others it may be the time to enter/exit sleep mode. i.e. Time in Nr. of mins since midnight.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

isProtocolSupported()

bool IRac::isProtocolSupported ( const decode_type_t  protocol )

static

Is the given protocol supported by the IRac class?

Parameters

[in]

protocol

The vendor/protocol type.

Returns

true if the protocol is supported by this class, otherwise false.

kelon()

void IRac::kelon ( IRKelonAc *  ac, const bool  togglePower, const stdAc::opmode_t  mode, const int8_t  dryGrade, const float  degrees, const stdAc::fanspeed_t  fan, const bool  toggleSwing, const bool  superCool, const int16_t  sleep  )

private

Send a Kelon A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRKelonAc object to use.
[in]	togglePower	Whether to toggle the unit's power
[in]	mode	The operation mode setting.
[in]	dryGrade	The dehumidification intensity grade
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	toggleSwing	Whether to toggle the swing setting
[in]	superCool	Run the device in Super cooling mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on

kelvinator()

void IRac::kelvinator ( IRKelvinatorAC *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  light, const bool  filter, const bool  clean  )

private

Send a Kelvinator A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRKelvinatorAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. XFan, dry filters etc

lg()

void IRac::lg ( IRLgAc *  ac, const lg_ac_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingv_t  swingv_prev, const stdAc::swingh_t  swingh, const bool  light  )

private

Send a LG A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRLgAc object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingv_prev	The previous vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	light	Turn on the LED/Display mode.

markAsSent()

void IRac::markAsSent

(

void

)

Update the previous state to the current one.

midea()

void IRac::midea ( IRMideaAC *  ac, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const float  sensorTemp, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  iFeel, const bool  quiet, const bool  quiet_prev, const bool  turbo, const bool  econo, const bool  light, const bool  clean, const int16_t  sleep = -1  )

private

Send a Midea A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMideaAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	sensorTemp	The room (iFeel) temperature sensor reading in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	iFeel	Whether to enable iFeel (remote temp) mode on the A/C unit.
[in]	quiet	Run the device in quiet/silent mode.
[in]	quiet_prev	The device's previous quiet/silent mode.
[in]	turbo	Toggle the device's turbo/powerful mode.
[in]	econo	Toggle the device's economical mode.
[in]	light	Toggle the LED/Display mode.
[in]	clean	Turn on the self-cleaning mode. e.g. XFan, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

Note

On Danby A/C units, swingv controls the Ion Filter instead.

mirage()

void IRac::mirage ( IRMirageAc *  ac, const stdAc::state_t  state  )

private

Send a Mirage 120-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishiAC object to use.
[in]	state	The desired state to send.

mitsubishi()

void IRac::mitsubishi ( IRMitsubishiAC *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const int16_t  clock = -1  )

private

Send a Mitsubishi A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishiAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

Note

Clock can only be set in 10 minute increments. i.e. % 10.

mitsubishi112()

void IRac::mitsubishi112 ( IRMitsubishi112 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet  )

private

Send a Mitsubishi 112-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishi112 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.

mitsubishi136()

void IRac::mitsubishi136 ( IRMitsubishi136 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  quiet  )

private

Send a Mitsubishi 136-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishi136 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.

mitsubishiHeavy152()

void IRac::mitsubishiHeavy152 ( IRMitsubishiHeavy152Ac *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  econo, const bool  filter, const bool  clean, const int16_t  sleep = -1  )

private

Send a Mitsubishi Heavy 152-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishiHeavy152Ac object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

mitsubishiHeavy88()

void IRac::mitsubishiHeavy88 ( IRMitsubishiHeavy88Ac *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  turbo, const bool  econo, const bool  clean  )

private

Send a Mitsubishi Heavy 88-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishiHeavy88Ac object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

neoclima()

void IRac::neoclima ( IRNeoclimaAc *  ac, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  turbo, const bool  econo, const bool  light, const bool  filter, const int16_t  sleep = -1  )

private

Send a Neoclima A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRNeoclimaAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

opmodeToString()

String IRac::opmodeToString ( const stdAc::opmode_t  mode, const bool  ha = false  )

static

Convert the supplied operation mode into the appropriate String.

Parameters

[in]	mode	The enum to be converted.
[in]	ha	A flag to indicate we want GoogleHome/HomeAssistant output.

Returns

The equivalent String for the locale.

panasonic()

void IRac::panasonic ( IRPanasonicAc *  ac, const panasonic_ac_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  filter, const int16_t  clock = -1  )

private

Send a Panasonic A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRPanasonicAc object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

panasonic32()

void IRac::panasonic32 ( IRPanasonicAc32 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh  )

private

Send a Panasonic A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRPanasonicAc32 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.

rhoss()

void IRac::rhoss ( IRRhossAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swing  )

private

Send an Rhoss A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRRhossAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swing	The swing setting.

samsung()

void IRac::samsung ( IRSamsungAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  econo, const bool  light, const bool  filter, const bool  clean, const bool  beep, const int16_t  sleep = -1, const bool  prevpower = true, const int16_t  prevsleep = -1, const bool  forceextended = true  )

private

Send a Samsung A/C message with the supplied settings.

Note

Multiple IR messages may be generated & sent.

Parameters

[in,out]	ac	A Ptr to an IRSamsungAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Toggle the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Toggle beep setting for receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. <= 0 is Off, > 0 is on.
[in]	prevpower	The power setting from the previous A/C state.
[in]	prevsleep	Nr. of minutes for sleep from the previous A/C state.
[in]	forceextended	Do we force sending the special extended message?

sanyo()

void IRac::sanyo ( IRSanyoAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const float  sensorTemp, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  iFeel, const bool  beep, const int16_t  sleep = -1  )

private

Send a Sanyo A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRSanyoAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	sensorTemp	The room (iFeel) temperature sensor reading in degrees Celsius.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	iFeel	Whether to enable iFeel (remote temp) mode on the A/C unit.
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

sanyo88()

void IRac::sanyo88 ( IRSanyoAc88 *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  turbo, const bool  filter, const int16_t  sleep = -1, const int16_t  clock = -1  )

private

Send a Sanyo 88-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRSanyoAc88 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

sendAc() [1/3]

bool IRac::sendAc	(	const decode_type_t	vendor,
		const int16_t	model,
		const bool	power,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const bool	celsius,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	econo,
		const bool	light,
		const bool	filter,
		const bool	clean,
		const bool	beep,
		const int16_t	sleep = -1,
		const int16_t	clock = -1
	)

Send A/C message for a given device using common A/C settings.

Parameters

[in]	vendor	The vendor/protocol type.
[in]	model	The A/C model if applicable.
[in]	power	The power setting.
[in]	mode	The operation mode setting.

Note

Changing mode from "Off" to something else does NOT turn on a device. You need to use power for that.

Parameters

[in]	degrees	The temperature setting in degrees.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	fan	The speed setting for the fan.

Note

The following are all "if supported" by the underlying A/C classes.

Parameters

[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on. Some devices it is the nr. of mins to run for. Others it may be the time to enter/exit sleep mode. i.e. Time in Nr. of mins since midnight.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

Returns

True, if accepted/converted/attempted etc. False, if unsupported.

sendAc() [2/3]

bool IRac::sendAc	(	const stdAc::state_t	desired,
		const stdAc::state_t *	prev = NULL
	)

Send A/C message for a given device using state_t structures.

Parameters

[in]	desired	The state_t structure describing the desired new ac state
[in]	prev	A Ptr to the state_t structure containing the previous state

Note

Changing mode from "Off" to something else does NOT turn on a device. You need to use power for that.

Returns

True, if accepted/converted/attempted etc. False, if unsupported.

Warning

: this is ABUSING current common parameters: clock and sleep as config key and value Hence, value pre-validation is performed (safe-mode) to avoid accidental device misconfiguration

sendAc() [3/3]

bool IRac::sendAc

(

void

)

Send an A/C message based soley on our internal state.

Returns

True, if accepted/converted/attempted. False, if unsupported.

sharp()

void IRac::sharp ( IRSharpAc *  ac, const sharp_ac_remote_model_t  model, const bool  on, const bool  prev_power, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingv_t  swingv_prev, const bool  turbo, const bool  light, const bool  filter, const bool  clean  )

private

Send a Sharp A/C message with the supplied settings.

Note

Multiple IR messages may be generated & sent.

Parameters

[in,out]	ac	A Ptr to an IRSharpAc object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	prev_power	The power setting from the previous A/C state.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingv_prev	The previous vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

strToBool()

bool IRac::strToBool ( const char *  str, const bool  def = false  )

static

Convert the supplied str into the appropriate boolean value.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The boolean value to return if no conversion was possible.

Returns

The equivalent boolean value.

strToCommandType()

stdAc::ac_command_t IRac::strToCommandType ( const char *  str, const stdAc::ac_command_t  def = stdAc::ac_command_t::kControlCommand  )

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns

The equivalent enum.

strToFanspeed()

stdAc::fanspeed_t IRac::strToFanspeed ( const char *  str, const stdAc::fanspeed_t  def = stdAc::fanspeed_t::kAuto  )

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns

The equivalent enum.

strToModel()

int16_t IRac::strToModel ( const char *  str, const int16_t  def = -1  )

static

Convert the supplied str into the appropriate enum.

Note

Assumes str is the model code or an integer >= 1.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns

The equivalent enum.

Note

After adding a new model you should update modelToStr() too.

strToOpmode()

stdAc::opmode_t IRac::strToOpmode ( const char *  str, const stdAc::opmode_t  def = stdAc::opmode_t::kAuto  )

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns

The equivalent enum.

strToSwingH()

stdAc::swingh_t IRac::strToSwingH ( const char *  str, const stdAc::swingh_t  def = stdAc::swingh_t::kOff  )

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns

The equivalent enum.

strToSwingV()

stdAc::swingv_t IRac::strToSwingV ( const char *  str, const stdAc::swingv_t  def = stdAc::swingv_t::kOff  )

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns

The equivalent enum.

swinghToString()

String IRac::swinghToString ( const stdAc::swingh_t  swingh )

static

Convert the supplied enum into the appropriate String.

Parameters

[in]

swingh

The enum to be converted.

Returns

The equivalent String for the locale.

swingvToString()

String IRac::swingvToString ( const stdAc::swingv_t  swingv )

static

Convert the supplied enum into the appropriate String.

Parameters

[in]

swingv

The enum to be converted.

Returns

The equivalent String for the locale.

tcl112()

void IRac::tcl112 ( IRTcl112Ac *  ac, const tcl_ac_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  quiet, const bool  turbo, const bool  light, const bool  econo, const bool  filter  )

private

Send a TCL 112-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTcl112Ac object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.

technibel()

void IRac::technibel ( IRTechnibelAc *  ac, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const int16_t  sleep = -1  )

private

Send a Technibel A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTechnibelAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

teco()

void IRac::teco ( IRTecoAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  light, const int16_t  sleep = -1  )

private

Send a Teco A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTecoAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

toshiba()

void IRac::toshiba ( IRToshibaAC *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  turbo, const bool  econo, const bool  filter  )

private

Send a Toshiba A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRToshibaAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (Pure/ion/pollen/etc) filter mode.

transcold()

void IRac::transcold ( IRTranscoldAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh  )

private

Send a Transcold A/C message with the supplied settings.

Note

May result in multiple messages being sent.

Parameters

[in,out]	ac	A Ptr to an IRTranscoldAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.

Note

-1 is Off, >= 0 is on.

trotec()

void IRac::trotec ( IRTrotecESP *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const int16_t  sleep = -1  )

private

Send a Trotec A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTrotecESP object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

trotec3550()

void IRac::trotec3550 ( IRTrotec3550 *  ac, const bool  on, const stdAc::opmode_t  mode, const bool  celsius, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv  )

private

Send a Trotec 3550 A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTrotecESP object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.

truma()

void IRac::truma ( IRTrumaAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const bool  quiet  )

private

Send a Truma A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTrumaAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	quiet	Run the device quietly if we can.

vestel()

void IRac::vestel ( IRVestelAc *  ac, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  turbo, const bool  filter, const int16_t  sleep = -1, const int16_t  clock = -1, const bool  sendNormal = true  )

private

Send a Vestel A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRVestelAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.
[in]	sendNormal	Do we send a Normal settings message at all? i.e In addition to the clock/time/timer message

voltas()

void IRac::voltas ( IRVoltas *  ac, const voltas_ac_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const stdAc::swingh_t  swingh, const bool  turbo, const bool  econo, const bool  light, const int16_t  sleep = -1  )

private

Send a Voltas A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRVoltas object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

whirlpool()

void IRac::whirlpool ( IRWhirlpoolAc *  ac, const whirlpool_ac_remote_model_t  model, const bool  on, const stdAc::opmode_t  mode, const float  degrees, const stdAc::fanspeed_t  fan, const stdAc::swingv_t  swingv, const bool  turbo, const bool  light, const int16_t  sleep = -1, const int16_t  clock = -1  )

private

Send a Whirlpool A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRWhirlpoolAc object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

Member Data Documentation

_inverted

bool IRac::_inverted

private

IR LED is lit when GPIO is LOW (true) or HIGH (false)?

_modulation

bool IRac::_modulation

private

Is frequency modulation to be used?

_pin

uint16_t IRac::_pin

private

The GPIO to use to transmit messages from.

_prev

stdAc::state_t IRac::_prev

private

The state we expect the device to currently be in.

next

stdAc::state_t IRac::next

The state we want the device to be in after we send.

---

The documentation for this class was generated from the following files:

• src/IRac.h
• src/IRac.cpp