Class for handling detailed Mitsubishi Heavy 88-bit A/C messages. More...

#include <ir_MitsubishiHeavy.h>

Collaboration diagram for IRMitsubishiHeavy88Ac:

Public Member Functions
	IRMitsubishiHeavy88Ac (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the state of the remote to a known good state/sequence. More...

void	send (const uint16_t repeat=kMitsubishiHeavy88MinRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void) const
	Get the current temperature setting. More...

void	setFan (const uint8_t fan)
	Set the speed of the fan. More...

uint8_t	getFan (void) const
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void) const
	Get the operating mode setting of the A/C. More...

void	setSwingVertical (const uint8_t pos)
	Set the Vertical Swing mode of the A/C. More...

uint8_t	getSwingVertical (void) const
	Get the Vertical Swing mode of the A/C. More...

void	setSwingHorizontal (const uint8_t pos)
	Set the Horizontal Swing mode of the A/C. More...

uint8_t	getSwingHorizontal (void) const
	Get the Horizontal Swing mode of the A/C. More...

void	setTurbo (const bool on)
	Set the Turbo mode of the A/C. More...

bool	getTurbo (void) const
	Get the Turbo mode of the A/C. More...

void	setEcono (const bool on)
	Set the Economical mode of the A/C. More...

bool	getEcono (void) const
	Get the Economical mode of the A/C. More...

void	set3D (const bool on)
	Set the 3D mode of the A/C. More...

bool	get3D (void) const
	Get the 3D mode of the A/C. More...

void	setClean (const bool on)
	Set the Clean mode of the A/C. More...

bool	getClean (void) const
	Get the Clean mode of the A/C. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t *data)
	Set the internal state from a valid code for this protocol. More...

stdAc::state_t	toCommon (void) const
	Convert the current internal state into its stdAc::state_t equivalent. More...

String	toString (void) const
	Convert the internal state into a human readable string. More...

Static Public Member Functions
static bool	checkZjsSig (const uint8_t *state)
	Verify the given state has a ZJ-S signature. More...

static bool	validChecksum (const uint8_t *state, const uint16_t length=kMitsubishiHeavy88StateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

static uint8_t	convertSwingV (const stdAc::swingv_t position)
	Convert a stdAc::swingv_t enum into it's native setting. More...

static uint8_t	convertSwingH (const stdAc::swingh_t position)
	Convert a stdAc::swingh_t enum into it's native setting. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

static stdAc::swingv_t	toCommonSwingV (const uint8_t pos)
	Convert a native vertical swing postion to it's common equivalent. More...

static stdAc::swingh_t	toCommonSwingH (const uint8_t pos)
	Convert a native horizontal swing postion to it's common equivalent. More...

Private Member Functions
void	checksum (void)
	Calculate the checksum for the current internal state of the remote. Note: Technically it has no checksum, but does have inverted byte pairs. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

Mitsubishi88Protocol	_

Detailed Description

Class for handling detailed Mitsubishi Heavy 88-bit A/C messages.

Constructor & Destructor Documentation

◆ IRMitsubishiHeavy88Ac()

IRMitsubishiHeavy88Ac::IRMitsubishiHeavy88Ac	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRMitsubishiHeavy88Ac::begin ( void )

Set up hardware to be able to send a message.

◆ calibrate()

int8_t IRMitsubishiHeavy88Ac::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRMitsubishiHeavy88Ac::checksum ( void )

private

Calculate the checksum for the current internal state of the remote. Note: Technically it has no checksum, but does have inverted byte pairs.

◆ checkZjsSig()

bool IRMitsubishiHeavy88Ac::checkZjsSig ( const uint8_t * state )

static

Verify the given state has a ZJ-S signature.

Parameters

[in] state A ptr to a state to be checked.

Returns: true, the check passed. Otherwise, false.

◆ convertFan()

uint8_t IRMitsubishiHeavy88Ac::convertFan ( const stdAc::fanspeed_t speed )

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRMitsubishiHeavy88Ac::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertSwingH()

uint8_t IRMitsubishiHeavy88Ac::convertSwingH ( const stdAc::swingh_t position )

static

Convert a stdAc::swingh_t enum into it's native setting.

Parameters

[in] position The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertSwingV()

uint8_t IRMitsubishiHeavy88Ac::convertSwingV ( const stdAc::swingv_t position )

static

Convert a stdAc::swingv_t enum into it's native setting.

Parameters

[in] position The enum to be converted.

Returns: The native equivalent of the enum.

◆ get3D()

bool IRMitsubishiHeavy88Ac::get3D ( void ) const

Get the 3D mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getClean()

bool IRMitsubishiHeavy88Ac::getClean ( void ) const

Get the Clean mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getEcono()

bool IRMitsubishiHeavy88Ac::getEcono ( void ) const

Get the Economical mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getFan()

uint8_t IRMitsubishiHeavy88Ac::getFan ( void ) const

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getMode()

uint8_t IRMitsubishiHeavy88Ac::getMode ( void ) const

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getPower()

bool IRMitsubishiHeavy88Ac::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRMitsubishiHeavy88Ac::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSwingHorizontal()

uint8_t IRMitsubishiHeavy88Ac::getSwingHorizontal ( void ) const

Get the Horizontal Swing mode of the A/C.

Returns: The native position/mode setting.

◆ getSwingVertical()

uint8_t IRMitsubishiHeavy88Ac::getSwingVertical ( void ) const

Get the Vertical Swing mode of the A/C.

Returns: The native position/mode setting.

◆ getTemp()

uint8_t IRMitsubishiHeavy88Ac::getTemp ( void ) const

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTurbo()

bool IRMitsubishiHeavy88Ac::getTurbo ( void ) const

Get the Turbo mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRMitsubishiHeavy88Ac::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRMitsubishiHeavy88Ac::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRMitsubishiHeavy88Ac::send ( const uint16_t repeat = kMitsubishiHeavy88MinRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ set3D()

void IRMitsubishiHeavy88Ac::set3D ( const bool on )

Set the 3D mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setClean()

void IRMitsubishiHeavy88Ac::setClean ( const bool on )

Set the Clean mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setEcono()

void IRMitsubishiHeavy88Ac::setEcono ( const bool on )

Set the Economical mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setFan()

void IRMitsubishiHeavy88Ac::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting.

◆ setMode()

void IRMitsubishiHeavy88Ac::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setPower()

void IRMitsubishiHeavy88Ac::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRMitsubishiHeavy88Ac::setRaw ( const uint8_t * data )

Set the internal state from a valid code for this protocol.

Parameters

[in] data A valid code for this protocol.

◆ setSwingHorizontal()

void IRMitsubishiHeavy88Ac::setSwingHorizontal ( const uint8_t pos )

Set the Horizontal Swing mode of the A/C.

Parameters

[in] pos The position/mode to set the swing to.

◆ setSwingVertical()

void IRMitsubishiHeavy88Ac::setSwingVertical ( const uint8_t pos )

Set the Vertical Swing mode of the A/C.

Parameters

[in] pos The position/mode to set the swing to.

◆ setTemp()

void IRMitsubishiHeavy88Ac::setTemp ( const uint8_t temp )

Set the temperature.

Parameters

[in] temp The temperature in degrees celsius.

◆ setTurbo()

void IRMitsubishiHeavy88Ac::setTurbo ( const bool on )

Set the Turbo mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ stateReset()

void IRMitsubishiHeavy88Ac::stateReset ( void )

Reset the state of the remote to a known good state/sequence.

◆ toCommon()

stdAc::state_t IRMitsubishiHeavy88Ac::toCommon ( void ) const

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRMitsubishiHeavy88Ac::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonSwingH()

stdAc::swingh_t IRMitsubishiHeavy88Ac::toCommonSwingH ( const uint8_t pos )

static

Convert a native horizontal swing postion to it's common equivalent.

Parameters

[in] pos A native position to convert.

Returns: The common horizontal swing position.

◆ toCommonSwingV()

stdAc::swingv_t IRMitsubishiHeavy88Ac::toCommonSwingV ( const uint8_t pos )

static

Convert a native vertical swing postion to it's common equivalent.

Parameters

[in] pos A native position to convert.

Returns: The common vertical swing position.

◆ toString()

String IRMitsubishiHeavy88Ac::toString ( void ) const

Convert the internal state into a human readable string.

Returns: A string containing the settings in human-readable form.

◆ validChecksum()

bool IRMitsubishiHeavy88Ac::validChecksum	(	const uint8_t *	state,
		const uint16_t	length = `kMitsubishiHeavy88StateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length/size of the state array.

Returns: true, if the state has a valid checksum. Otherwise, false. Note: Technically it has no checksum, but does have inverted byte pairs.

Member Data Documentation

◆ _

Mitsubishi88Protocol IRMitsubishiHeavy88Ac::_

private

◆ _irsend

IRsend IRMitsubishiHeavy88Ac::_irsend

private

Instance of the IR send class.

The documentation for this class was generated from the following files:

src/ir_MitsubishiHeavy.h
src/ir_MitsubishiHeavy.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRMitsubishiHeavy88Ac()

Member Function Documentation

◆ begin()

◆ calibrate()

◆ checksum()

◆ checkZjsSig()

◆ convertFan()

◆ convertMode()

◆ convertSwingH()

◆ convertSwingV()

◆ get3D()

◆ getClean()

◆ getEcono()

◆ getFan()

◆ getMode()

◆ getPower()

◆ getRaw()

◆ getSwingHorizontal()

◆ getSwingVertical()

◆ getTemp()

◆ getTurbo()

◆ off()

◆ on()

◆ send()

◆ set3D()

◆ setClean()

◆ setEcono()

◆ setFan()

◆ setMode()

◆ setPower()

◆ setRaw()

◆ setSwingHorizontal()

◆ setSwingVertical()

◆ setTemp()

◆ setTurbo()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonSwingH()

◆ toCommonSwingV()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _irsend