Class for handling detailed Vestel A/C messages. More...

#include <ir_Vestel.h>

Collaboration diagram for IRVestelAc:

Public Member Functions
	IRVestelAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the state of the remote to a known good state/sequence. More...

void	send (const uint16_t repeat=kNoRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

void	setAuto (const int8_t autoLevel)
	Set Auto mode/level of the A/C. More...

void	setTimer (const uint16_t minutes)
	Set Timer option of A/C. More...

uint16_t	getTimer (void) const
	Get the Timer time of A/C. More...

void	setTime (const uint16_t minutes)
	Set the A/C's internal clock. More...

uint16_t	getTime (void) const
	Get the A/C's internal clock's time. More...

void	setOnTimer (const uint16_t minutes)
	Set the On timer time on the A/C. More...

uint16_t	getOnTimer (void) const
	Get the A/C's On Timer time. More...

void	setOffTimer (const uint16_t minutes)
	Set the Off timer time on the A/C. More...

uint16_t	getOffTimer (void) const
	Get the A/C's Off Timer time. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void) const
	Get the current temperature setting. More...

void	setFan (const uint8_t fan)
	Set the speed of the fan. More...

uint8_t	getFan (void) const
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void) const
	Get the operating mode setting of the A/C. More...

void	setRaw (const uint8_t *newState)
	Set the internal state from a valid code for this protocol. More...

void	setRaw (const uint64_t newState)
	Set the internal state from a valid code for this protocol. More...

uint64_t	getRaw (void)
	Get a copy of the internal state/code for this protocol. More...

void	setSwing (const bool on)
	Set the Swing Roaming setting of the A/C. More...

bool	getSwing (void) const
	Get the Swing Roaming setting of the A/C. More...

void	setSleep (const bool on)
	Set the Sleep setting of the A/C. More...

bool	getSleep (void) const
	Get the Sleep setting of the A/C. More...

void	setTurbo (const bool on)
	Set the Turbo setting of the A/C. More...

bool	getTurbo (void) const
	Get the Turbo setting of the A/C. More...

void	setIon (const bool on)
	Set the Ion (Filter) setting of the A/C. More...

bool	getIon (void) const
	Get the Ion (Filter) setting of the A/C. More...

bool	isTimeCommand (void) const
	Is the current state a time command? More...

bool	isOnTimerActive (void) const
	Get if the On Timer is active on the A/C. More...

void	setOnTimerActive (const bool on)
	Set the On timer to be active on the A/C. More...

bool	isOffTimerActive (void) const
	Get if the Off Timer is active on the A/C. More...

void	setOffTimerActive (const bool on)
	Set the Off timer to be active on the A/C. More...

bool	isTimerActive (void) const
	Get if the Timer is active on the A/C. More...

void	setTimerActive (const bool on)
	Set the timer to be active on the A/C. More...

stdAc::state_t	toCommon (void) const
	Convert the current internal state into its stdAc::state_t equivalent. More...

String	toString (void) const
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (const uint64_t state)
	Verify the checksum is valid for a given state. More...

static uint8_t	calcChecksum (const uint64_t state)
	Calculate the checksum for a given state. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivalent. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

Private Member Functions
void	checksum (void)
	Calculate & set the checksum for the current internal state of the remote. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

VestelProtocol	_

Detailed Description

Class for handling detailed Vestel A/C messages.

Constructor & Destructor Documentation

◆ IRVestelAc()

IRVestelAc::IRVestelAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRVestelAc::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRVestelAc::calcChecksum ( const uint64_t state )

static

Calculate the checksum for a given state.

Parameters

[in] state The state to calc the checksum of.

Returns: The calculated checksum value.

◆ calibrate()

int8_t IRVestelAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRVestelAc::checksum ( void )

private

Calculate & set the checksum for the current internal state of the remote.

◆ convertFan()

uint8_t IRVestelAc::convertFan ( const stdAc::fanspeed_t speed )

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRVestelAc::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ getFan()

uint8_t IRVestelAc::getFan ( void ) const

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getIon()

bool IRVestelAc::getIon ( void ) const

Get the Ion (Filter) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRVestelAc::getMode ( void ) const

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getOffTimer()

uint16_t IRVestelAc::getOffTimer ( void ) const

Get the A/C's Off Timer time.

Returns: The time expressed in nr. of minutes.

◆ getOnTimer()

uint16_t IRVestelAc::getOnTimer ( void ) const

Get the A/C's On Timer time.

Returns: The time expressed in nr. of minutes.

◆ getPower()

bool IRVestelAc::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint64_t IRVestelAc::getRaw ( void )

Get a copy of the internal state/code for this protocol.

Returns: A code for this protocol based on the current internal state.

◆ getSleep()

bool IRVestelAc::getSleep ( void ) const

Get the Sleep setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwing()

bool IRVestelAc::getSwing ( void ) const

Get the Swing Roaming setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRVestelAc::getTemp ( void ) const

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTime()

uint16_t IRVestelAc::getTime ( void ) const

Get the A/C's internal clock's time.

Returns: The time expressed in nr. of minutes past midnight.

◆ getTimer()

uint16_t IRVestelAc::getTimer ( void ) const

Get the Timer time of A/C.

Returns: The number of minutes of time on the timer.

◆ getTurbo()

bool IRVestelAc::getTurbo ( void ) const

Get the Turbo setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ isOffTimerActive()

bool IRVestelAc::isOffTimerActive ( void ) const

Get if the Off Timer is active on the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ isOnTimerActive()

bool IRVestelAc::isOnTimerActive ( void ) const

Get if the On Timer is active on the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ isTimeCommand()

bool IRVestelAc::isTimeCommand ( void ) const

Is the current state a time command?

Returns: true, if the state is a time message. Otherwise, false.

◆ isTimerActive()

bool IRVestelAc::isTimerActive ( void ) const

Get if the Timer is active on the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRVestelAc::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRVestelAc::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRVestelAc::send ( const uint16_t repeat = kNoRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setAuto()

void IRVestelAc::setAuto ( const int8_t autoLevel )

Set Auto mode/level of the A/C.

Parameters

[in] autoLevel The auto mode/level setting.

◆ setFan()

void IRVestelAc::setFan ( const uint8_t fan )

Set the speed of the fan.

Parameters

[in] fan The desired setting.

◆ setIon()

void IRVestelAc::setIon ( const bool on )

Set the Ion (Filter) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRVestelAc::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

Note: If we get an unexpected mode, default to AUTO.

◆ setOffTimer()

void IRVestelAc::setOffTimer ( const uint16_t minutes )

Set the Off timer time on the A/C.

Parameters

[in] minutes Time in nr. of minutes.

◆ setOffTimerActive()

void IRVestelAc::setOffTimerActive ( const bool on )

Set the Off timer to be active on the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setOnTimer()

void IRVestelAc::setOnTimer ( const uint16_t minutes )

Set the On timer time on the A/C.

Parameters

[in] minutes Time in nr. of minutes.

◆ setOnTimerActive()

void IRVestelAc::setOnTimerActive ( const bool on )

Set the On timer to be active on the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setPower()

void IRVestelAc::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw() [1/2]

void IRVestelAc::setRaw ( const uint64_t newState )

Set the internal state from a valid code for this protocol.

Parameters

[in] newState A valid code for this protocol.

◆ setRaw() [2/2]

void IRVestelAc::setRaw ( const uint8_t * newState )

Set the internal state from a valid code for this protocol.

Parameters

[in] newState A valid code for this protocol.

◆ setSleep()

void IRVestelAc::setSleep ( const bool on )

Set the Sleep setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwing()

void IRVestelAc::setSwing ( const bool on )

Set the Swing Roaming setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRVestelAc::setTemp ( const uint8_t temp )

Set the temperature.

Parameters

[in] temp The temperature in degrees celsius.

◆ setTime()

void IRVestelAc::setTime ( const uint16_t minutes )

Set the A/C's internal clock.

Parameters

[in] minutes The time expressed in nr. of minutes past midnight.

◆ setTimer()

void IRVestelAc::setTimer ( const uint16_t minutes )

Set Timer option of A/C.

Parameters

[in] minutes Nr of minutes the timer is to be set for.

Note: Valid arguments are 0, 0.5, 1, 2, 3 and 5 hours (in minutes). 0 disables the timer.

◆ setTimerActive()

void IRVestelAc::setTimerActive ( const bool on )

Set the timer to be active on the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTurbo()

void IRVestelAc::setTurbo ( const bool on )

Set the Turbo setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ stateReset()

void IRVestelAc::stateReset ( void )

Reset the state of the remote to a known good state/sequence.

Note: Power On, Mode Auto, Fan Auto, Temp = 25C/77F

◆ toCommon()

stdAc::state_t IRVestelAc::toCommon ( void ) const

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRVestelAc::toCommonFanSpeed ( const uint8_t spd )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] spd The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRVestelAc::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivalent.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toString()

String IRVestelAc::toString ( void ) const

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRVestelAc::validChecksum ( const uint64_t state )

static

Verify the checksum is valid for a given state.

Parameters

[in] state The state to verify the checksum of.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _

VestelProtocol IRVestelAc::_

private

◆ _irsend

IRsend IRVestelAc::_irsend

private

Instance of the IR send class.

The documentation for this class was generated from the following files:

src/ir_Vestel.h
src/ir_Vestel.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRVestelAc()

Member Function Documentation

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ getFan()

◆ getIon()

◆ getMode()

◆ getOffTimer()

◆ getOnTimer()

◆ getPower()

◆ getRaw()

◆ getSleep()

◆ getSwing()

◆ getTemp()

◆ getTime()

◆ getTimer()

◆ getTurbo()

◆ isOffTimerActive()

◆ isOnTimerActive()

◆ isTimeCommand()

◆ isTimerActive()

◆ off()

◆ on()

◆ send()

◆ setAuto()

◆ setFan()

◆ setIon()

◆ setMode()

◆ setOffTimer()

◆ setOffTimerActive()

◆ setOnTimer()

◆ setOnTimerActive()

◆ setPower()

◆ setRaw() [1/2]

◆ setRaw() [2/2]

◆ setSleep()

◆ setSwing()

◆ setTemp()

◆ setTime()

◆ setTimer()

◆ setTimerActive()

◆ setTurbo()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _irsend