Class for handling detailed Mitsubishi 136-bit A/C messages. More...

#include <ir_Mitsubishi.h>

Collaboration diagram for IRMitsubishi136:

Public Member Functions
	IRMitsubishi136 (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the state of the remote to a known good state/sequence. More...

void	send (const uint16_t repeat=kMitsubishi136MinRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

void	setTemp (const uint8_t degrees)
	Set the temperature. More...

uint8_t	getTemp (void) const
	Get the current temperature setting. More...

void	setFan (const uint8_t speed)
	Set the speed of the fan. More...

uint8_t	getFan (void) const
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void) const
	Get the operating mode setting of the A/C. More...

void	setSwingV (const uint8_t position)
	Set the Vertical Swing mode of the A/C. More...

uint8_t	getSwingV (void) const
	Get the Vertical Swing mode of the A/C. More...

void	setQuiet (const bool on)
	Set the Quiet mode of the A/C. More...

bool	getQuiet (void) const
	Get the Quiet mode of the A/C. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t *data)
	Set the internal state from a valid code for this protocol. More...

stdAc::state_t	toCommon (void) const
	Convert the current internal state into its stdAc::state_t equivalent. More...

String	toString (void) const
	Convert the internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (const uint8_t *data, const uint16_t len=kMitsubishi136StateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

static uint8_t	convertSwingV (const stdAc::swingv_t position)
	Convert a stdAc::swingv_t enum into it's native setting. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivalent. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

static stdAc::swingv_t	toCommonSwingV (const uint8_t pos)
	Convert a native vertical swing postion to it's common equivalent. More...

Private Member Functions
void	checksum (void)
	Calculate the checksum for the current internal state of the remote. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

Mitsubishi136Protocol	_

Detailed Description

Class for handling detailed Mitsubishi 136-bit A/C messages.

Constructor & Destructor Documentation

◆ IRMitsubishi136()

IRMitsubishi136::IRMitsubishi136	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRMitsubishi136::begin ( void )

Set up hardware to be able to send a message.

◆ calibrate()

int8_t IRMitsubishi136::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRMitsubishi136::checksum ( void )

private

Calculate the checksum for the current internal state of the remote.

◆ convertFan()

uint8_t IRMitsubishi136::convertFan ( const stdAc::fanspeed_t speed )

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRMitsubishi136::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertSwingV()

uint8_t IRMitsubishi136::convertSwingV ( const stdAc::swingv_t position )

static

Convert a stdAc::swingv_t enum into it's native setting.

Parameters

[in] position The enum to be converted.

Returns: The native equivalent of the enum.

◆ getFan()

uint8_t IRMitsubishi136::getFan ( void ) const

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getMode()

uint8_t IRMitsubishi136::getMode ( void ) const

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getPower()

bool IRMitsubishi136::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getQuiet()

bool IRMitsubishi136::getQuiet ( void ) const

Get the Quiet mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRMitsubishi136::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSwingV()

uint8_t IRMitsubishi136::getSwingV ( void ) const

Get the Vertical Swing mode of the A/C.

Returns: The native position/mode setting.

◆ getTemp()

uint8_t IRMitsubishi136::getTemp ( void ) const

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ off()

void IRMitsubishi136::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRMitsubishi136::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRMitsubishi136::send ( const uint16_t repeat = kMitsubishi136MinRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setFan()

void IRMitsubishi136::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting.

◆ setMode()

void IRMitsubishi136::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setPower()

void IRMitsubishi136::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setQuiet()

void IRMitsubishi136::setQuiet ( const bool on )

Set the Quiet mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRMitsubishi136::setRaw ( const uint8_t * data )

Set the internal state from a valid code for this protocol.

Parameters

[in] data A valid code for this protocol.

◆ setSwingV()

void IRMitsubishi136::setSwingV ( const uint8_t position )

Set the Vertical Swing mode of the A/C.

Parameters

[in] position The position/mode to set the swing to.

◆ setTemp()

void IRMitsubishi136::setTemp ( const uint8_t degrees )

Set the temperature.

Parameters

[in] degrees The temperature in degrees celsius.

◆ stateReset()

void IRMitsubishi136::stateReset ( void )

Reset the state of the remote to a known good state/sequence.

◆ toCommon()

stdAc::state_t IRMitsubishi136::toCommon ( void ) const

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRMitsubishi136::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRMitsubishi136::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivalent.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonSwingV()

stdAc::swingv_t IRMitsubishi136::toCommonSwingV ( const uint8_t pos )

static

Convert a native vertical swing postion to it's common equivalent.

Parameters

[in] pos A native position to convert.

Returns: The common vertical swing position.

◆ toString()

String IRMitsubishi136::toString ( void ) const

Convert the internal state into a human readable string.

Returns: A string containing the settings in human-readable form.

◆ validChecksum()

bool IRMitsubishi136::validChecksum	(	const uint8_t *	data,
		const uint16_t	len = `kMitsubishi136StateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	data	The array to verify the checksum of.
[in]	len	The length of the data array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _

Mitsubishi136Protocol IRMitsubishi136::_

private

◆ _irsend

IRsend IRMitsubishi136::_irsend

private

Instance of the IR send class.

The documentation for this class was generated from the following files:

src/ir_Mitsubishi.h
src/ir_Mitsubishi.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRMitsubishi136()

Member Function Documentation

◆ begin()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ convertSwingV()

◆ getFan()

◆ getMode()

◆ getPower()

◆ getQuiet()

◆ getRaw()

◆ getSwingV()

◆ getTemp()

◆ off()

◆ on()

◆ send()

◆ setFan()

◆ setMode()

◆ setPower()

◆ setQuiet()

◆ setRaw()

◆ setSwingV()

◆ setTemp()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toCommonSwingV()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _irsend